Dukane 41c28 Ultrasonic Converter for 40kHz Ultrasonic Welding
What is ultrasonic transducer
Ultrasonic transducers are piezoelectric ceramics that resonate at ultrasonic frequencies and convert electrical signals into mechanical vibrations by the piezoelectric effect of the material. When the transducer is used as a transmitter, the electrical oscillating signal sent from the excitation source will cause a change in the electric or magnetic field in the electrical energy storage element of the transducer, which changes the mechanical vibration system of the transducer through some effect. A driving force is generated to cause it to vibrate, thereby propelling the medium in contact with the mechanical vibration system of the transducer to vibrate and radiate sound waves into the medium.
ultrasonic transducer is an energy conversion device whose performance description and evaluation requires many parameters. The characteristics of the transducer include resonance frequency, frequency bandwidth, electromechanical coupling coefficient, electroacoustic efficiency, mechanical quality factor, impedance characteristics, frequency characteristics, Directivity, transmit and receive sensitivity, etc. Transducers for different applications have different performance parameters. For example, for an emissive transducer, the transducer is required to have large output power and high energy conversion efficiency; Receiver-type transducers require a wide frequency band and high sensitivity and resolution. Therefore, in the specific design process of the transducer, the relevant parameters of the transducer must be rationally designed according to the specific application.
In order to determine the operating state of the transducer, the state equation of the mechanical vibration system and the equation of state of the circuit must be obtained. The equation of state of the mechanical system of the transducer (referred to as the mechanical vibration equation) is when the transducer is in operation. Describe the relationship between the force of the mechanical vibration system and the vibration velocity, and the equation of state of the circuit system (referred to as the circuit state equation) describes the vibration characteristics of the circuit system. Since the mechanical system and the circuit system of the transducer are coupled to each other Therefore, the vibration of the mechanical system will affect the balance of the circuit, and the change of the circuit will also affect the vibration of the mechanical system. Therefore, we always use these equations to analyze and discuss the working characteristics of the transducer.
110-3142 Dukane 20kHZ Ultrasonic Converter for Welding fits 48A15 and 48B15 press systems and other older systems using the small form transducer and a 400 or 800 watt 20KHz generator.
Output thread is 3/8-24.
Dukane 41C28 Ultrasonic Converter for 40Khz Ultrasonic Welding
This transducer fits machines using the small form transducer with 500, 1000, 1200, 1500, 1600, 1700, 1800 and 2000 watt generators utilizing the 43B18 press/thruster and some other older press or thruster systems. Output thread is 1/2-20.
We have full series Dukane ultrasonic transducer:
Heavy Duty 110-3122
Standard on Ultra Series systems heavy-duty series press and thruster systems utilizing model 43A250, 43A255, 43D255, 43E255, 43A260, or 43B260 press/thruster
Standard 40 kHz 110-3429
for 43A240 press
This transducer is designed for all Dukane 40 kHz systems utilizing the 43A240 press/thruster and generators of 700 watts power rating or less
Slim line 110-3168
This 20 KHz transducer fits machines using the small form transducer with 500, 1000, 1200, 1500, 1600, 1700, 1800 and 2000 watt generators utilizing the 43B18 press/thruster and some other older press or thruster systems. Output thread is 1/2-20.
20 kHz PROBES
41C30 41C30 (Rear Mount)
41C30-185 (Side mount)
This heavy duty probe uses the same piezo driver assembly and housing as the 110-3122 standard heavy-duty press mount transducer, but it has a connector to accept a 200-479 ultrasound cable. Can not be used in hand-held operations. Output thread is 1/2-20.
40 kHz probe
41C28 Side mount probe
Sealed Transducers 41S30
This probe uses the same piezo driver assembly as 110-3122 standard heavy duty transducer but has a sealed housing and a 24" cord terminating in a mil-spec connector to facilitate use in harsh environments or where the equipment must be hosed down for cleaning. The housing has fittings for 1/4" OD poly tubing to carry dry cooling air to and from the driver assembly. Can not be mounted in a standard Dukane press. Requires the use of 200-1233-10 ultrasound cable. Output thread is 1/2-20.
110-3142
This slim-style transducer fits 48A15 and 48B15 press systems and other older systems using the small form transducer and a 400 or 800 watt 20KHz generator.
Output thread is 3/8-24.
Service and shipment
l Warranty one year for transducer.
l You can contact us for technical inquiry any time.
l We supply OEM service for oversea customer, also will keep Confidentiality for our customers.
l We supply customized products service for small quantity also.
l Shipment by FED-EX /DHL
){kind=link}
){kind=link}